• Transparent
• Continuously flexible floors
• The material displays very low levels of yellowing upon prolonged exposure to UV
• Excellent mechanical properties
• Outstanding resistance to chemicals
• Outstanding hydrolysis and oxidation resistance
• Absolutely non foaming
• Comfortable application

• IntoDEC®-MS 1K, binder aggregate, system for decorative internal floor surfacing
• Continuously flexible floors
• Showrooms
• Living areas
• Shops
• Supermarkets
• Offices
• Schools and colleges

Consumption 4-6% Weight of the dry granules.

The exact ratio depends on the dust content of the granules.

Clean the surface using a high pressure washer if possible.

Remove oil, grease and wax contaminants. cement laitance, loose particles, mould release agents, cured membranes must also be removed. The application surface must be dry.

Priming: Priming is required when application is on non-porous substrates, such as ceramic/glazed tiles. In this case, Primer-D 1K is used.

During the floor quartz carpet application;
For a more comfortable application, spray the granules and your trowel with a mixture of 20% glass cleaning water and 80% tap water.
Clean your trowel frequently with Cellulosic thinner during the application phase.

When applying in closed areas, to ensure contact with the humidity in the atmosphere, Open the windows to allow ventilation.
After the IntoDEC® MS-1K binder + granule mixture is mixed with the mixer.
While the quartz carpet application process continues.
In the course of time, there will be fluidity in the chemical towards the bottom of the bucket. IntoDEC® MS-1K density of 300-400 gram granules remaining at the bottom of the bucket will exceed 5%. For this reason;
* The average 300-400 grams of granules remaining at the bottom of the bucket should never be applied.